Cloning your cock is pretty easy to do. My girlfriend was wanting me to clone my cock so we can play with it. This is what I have to do to get her to let me have anal sex with her. She still wants to be fucked in her pussy at the same time, so she wanted me to clone myself. The other thing she wanted was it had to be glow in the dark. So yeah, I”m gonna put it in her ass!

So I started looking around for different molding kits. There are tons of them out there. Some are very exspensive as well. So I decided to do a little research and price comparison, etc. I found the best place to buy was amazon.com as usual. They were the cheapest, had all the other kits from all the other websites as well, but cheaper!

The process is very easy, first, have your girlfriend get you hard, or if you are wanting to surprise her, then get yourself hard! Next you mix the molding power with water, put your cock in the putty stuff, then mix the rubber mix, pour it into the hole your cock made, let it sit and harden, then pull it out! That easy! Now if you are wanting to make it vibrate as well, basically the same steps, but purchase a vibrating bullet, any will do, and put it inside the rubber mix after you pour it into the mold. After it dries pull out, and you have a vibrating version of your cock! How cool is that?

Some of these penis cloning kits already include a vibrator with them. So be sure to check if the kit you ordered already has a vibrator so you don’t buy another one. If you do, oh well, I’m sure you can use it for something!

One thing to make sure you do when using these cloning kits. The directions will tell you when mixing your molding power with water to have the water 98F/37C then mix the water and molding power. They will tell you that you have exactly 2 minutes to mix power, pour the mix into the tube, put your cock in the mix, WRONG! You do not have 2 minutes, I timed everything, measured exactly, and you only have 1 minute, 20 seconds if that! Basically what I did was get hard, mix the molding power and water as fast as you can, don’t try to mix it 100%, it will harden befor eyou get it all mixed. I had the molding power already in the mixing bowl, poured in the water stirred as fast as I could, I could still see the powder laying in the water in clumps, that’s fine! Again, do not try to stir it all the way or you just wasted your money and have to order another kit! Trist me I had to do this a couple times before I found you really don’t have the 2 minutes they say you do! If you see the molding powder and water mix starting to harden you are already too late! It needs to be liquidy, then pour into the tube, slop it in, don’t try to be careful or you waste time, then put your cock in the liquid, you will probably spill some molding mix out as you put your cock in, so you may want to put down plastic or newspaper!

After I put my cock in the liquid molding mix, I felt my cock start to go limp! They say this isn’t a real problem as long as it was fully hard. But I felt it would be a problem, so I pushed the tube against my body as hard as I could, so no more molding mix will fall out, then I slightly squeezed the tube around the head of my cock to play with it and keep it hard! I didn’t want to screw up another cock molding kit, so I kept this tube on my for about a minute.

Now pull your cock out of the molding kit and you will see a hole where your cock was! Congrats, this was the hardest task! The rest is very easy. Just let this mold sit for about 2 hours before you mix the rubbers together and pour into it.

Now let the rubbers sit inside the mold for 24 hours! Yes this is important! I know you are wanting to pull it out and play with it, but you will ruin it if you pull it out before 24 hours! After 24 hours the instructions say you can start using this home made dildo, but I would not recommend it! Well when you pull it out after the 24 hours has passed and the dildo is not sticky at all! Then you can use it! Mine was still sllightly sticky and still smelled like super glue or something. Wait for it to completely dry, I waited 24 hours in the mold, 24 hours out of the mold until mine was finally ready to use.

Remember you don’t want to put this inside your girlfriend or wife’s pussy while it is still sticky and smells like chemicals as you may harm her pussy!

So check out some of these products and let me know what you think as well!
Clone Your Cock Products